Kerbstone Cutting Machine

Granite kerb stone cutting machine is mainly for cutting slab width above 50mm, the machine cut with 10-14pcs of blade at the same time which will dramatically increase cutting speed and overal output, daily capacity can reach 30-35m³/24h.The machine is widely used for kerbstone, roadside stone, cobblestone and tombstone etc. kerbstone cutting machine line included one slicing machine(DF1200-12S) and one edge cutting machine(DF1200-1S), worker load thick slab to the slicing machine with...

Kerb stone cutting machine features: Note：if single DF1200-12 is required, roller on worktable is no need Kerb stone cutting machine advantages: 1. No foundation needed, easy installation, easy for shipping. 2. It adopts enlarged trolley, 2 pcs of block can be cut at one time, which can greatly improve output and efficiency. 3. It uses the main spindle and a vice spindle to seal together which can ensure the machine stable while cutting hard granite. 4. It uses a simple program of moveme

Introduction This kerb stone flaming machine is specially developed for processing the burned surface of curbstone. It uses flame spraying technology to form a rough burned surface on the stone slab. It has the characteristics of anti-slip, wear-resistant and beautiful. It is widely used i

Granite kerbstone cutting machine included one slicing machine(DF1200-12S) and one edge cutting machine(DF1200-1S), worker load thick slab to the slicing machine with a crane, after slicing machine finish cutting, the roller on worktable hydraulically lift up and transfer the stone to the next edge cutting machine. The edge cutting machine has hydraulic pushers to push all the stone with blade gap tight and together to ensure a precise cutting. After that, the cutting process is finished and

The introduction ofautomatic stone cutting machine This kerbstone cutting machine line is mainly for cutting slab width above 50mm, the machine cut with 10-14pcs of blade at the same time which will dramatically increase cutting speed and overal output, daily capacity can reach 30-35m³/24h.The

Introduction of kerbstone chamfering machine The chamfering machine adopts an enlarged frame design, which is sturdy and durable, ensuring excellent performance in long-term use. The core components of the equipment, such as motors, bearings, pressure wheels, and hydraulic accessories, are all dom

Machinepart The machine line included one slicing machine(DF1200-12S) and one edge cutting machine(DF1200-1S), worker load thick slab to the slicing machine with a crane, after slicing machine finish cutting, the roller on worktable hydraulically lift